Also a router, this modem/router combination will have 4 LAN? ports, and one coaxial for WAN?. The cable modem will support Wifi?-7, will have a USB-C port for updating any firmware locally, or to connect your device to the modem automatically to connect to your circle. Senitrus will work with all cable providers to get the modem working properly. This is important as it would also setup the wifi network. To assure that everything is booted up, wait 15 minutes after a reboot for things to get back working again. There will also be a digital marquee style indicator to identify the reason of any issues. For example, if this the first boot, and you aren’t getting connected, you might need your MAC address refreshed.
The A model will support 1GBPS connection, and offer no other solutions integrated. As with all Senitrus devices, this cable modem will have a microSDXC card slot to add storage to the cable modem, and offer a resource for either caching content, or offering common downloads. If you are going to distribute software through this channel, make sure you have such rights with the publisher. You will see a status light on the top to give you knowledge of the well being of the modem. Red is not connecting to any resource. Yellow is LAN only, and Green is Internet connected.
The P series will support 10GBPS connection, and while there might not be any cable internet services going that high, it is also important to the LAN in providing a 10GBPS from one network connected device to another (assuming both supports 10GBPS). The cable modem as with many P series devices will support a nanoSIM? card to offer an alternative connection to the internet. You would see 2 lights in front towards the top. One is cable, and the other is cellular. As with the A series, red is not connected, yellow is LAN only, and green is connected. If cable modem is not connecting for any reason, you would receive a notification on your Senitrus devices. This will happen even if you have cellular as one of your connections is not working properly. You also will have 2RJ11 ports in the back of the modem. This is ideal if you have telephone services with your cable internet provider.